Changing internal code

Prerequisites:

To change internal code:

1. You must be logged on a Hardware Management Console in at least the advanced operator user mode.

After you satisfy the prerequisites, follow these instructions to start a task for changing internal code:

From the Hardware Management Console Workplace:
1. Locate the task:
   1. Open the Task Lists view.

      This opens the Task Lists Work Area.

   2. Open Change Management Tasks.

      This open the Change Management task list on the right side of the workplace. The list contains the task you will start: Change Internal Code.

2. Locate the target CPCs:
   1. Open the Groups view.

      This opens the Groups Work Area.

   2. Select a group of CPCs if you want to change the internal code of all CPCs in the group.

      Otherwise, to change the internal code of one or more particular CPCs:

      1. Open the CPC group or any other group that contains the CPCs you want to work with.

         This opens the group's work area. The area contains the target CPCs.

      2. Select each CPC for which you want to change internal code.
3. To start the task with the target group or CPCs, either:
   • Drag and drop Change Internal Code on the target group or any target CPC.
   • Or drag and drop the target group or any target CPC on Change Internal Code.
   • Or, after selecting the target group or target CPCs, double-click on Change Internal Code.

   This opens the Change Internal Code window. It provides controls for changing internal code.

4. After you start the task, request help for the controls or the window for additional information about using them to change internal code.